NOKIA

SE/stuff/NOKIA/NOKIA.ino

@@ -0,0 +1,124 @@
+#include <SPI.h>
+#include <Adafruit_GFX.h>
+#include <Adafruit_PCD8544.h>
+
+#define Adafruit_PCD8544_LED 9 //NIEB
+
+#define Adafruit_PCD8544_CLK 13 //NIEB
+#define Adafruit_PCD8544_DIN 11 //DN MOSI? //ZIEL
+#define Adafruit_PCD8544_DC 7 //ZOLT
+#define Adafruit_PCD8544_CS 10 //SCE CZERWON
+#define Adafruit_PCD8544_RST 8 //POMARANCZ
+// Declare LCD object for software SPI
+// Adafruit_PCD8544(CLK,DIN,D/C,CE,RST);
+//  Adafruit_PCD8544(int8_t SCLK, int8_t DIN, int8_t DC, int8_t CS, int8_t RST);
+
+Adafruit_PCD8544 display = Adafruit_PCD8544(Adafruit_PCD8544_CLK, Adafruit_PCD8544_DIN, Adafruit_PCD8544_DC, Adafruit_PCD8544_CS, Adafruit_PCD8544_RST);
+
+/*
+ * 
+ * Pinout Table :Pinout Table :
+
+Pin Number | Pin Label | Pin Function |Input/Output
+
+1 | VCC | Positive power supply | Input
+2 | GND | Ground | Input
+3 | SCE | Chip select | Input //dp10
+4 | RST | Reset | Input  //dp8
+5 | D/C | Mode select | Input //dp7
+6 | DN(MOSI) | Serial data in | Input //dp11
+7 | SCLK | Serial clock | Input //dp13
+8 | LED | LED backlight supply | Input //dp9
+
+ * */
+
+
+
+int rotatetext = 1;
+
+void setup()   {
+  Serial.begin(9600);
+
+  //Initialize Display
+  display.begin();
+
+  // you can change the contrast around to adapt the display for the best viewing!
+  display.setContrast(57);
+
+  // Clear the buffer.
+  display.clearDisplay();
+
+  // Display Text
+  display.setTextSize(1);
+  display.setTextColor(BLACK);
+  display.setCursor(0,0);
+  display.println("Hello world!");
+  display.display();
+  delay(2000);
+  display.clearDisplay();
+
+
+  // Display Inverted Text
+  display.setTextColor(WHITE, BLACK); // 'inverted' text
+  display.setCursor(0,0);
+  display.println("Hello world!");
+  display.display();
+  delay(2000);
+  display.clearDisplay();
+
+
+  //digitalWrite();
+analogWrite(Adafruit_PCD8544_LED,125);
+
+  // Scaling Font Size
+  display.setTextColor(BLACK);
+  display.setCursor(0,0);
+  display.setTextSize(2);
+  display.println("Hello!");
+  display.display();
+  delay(2000);
+  display.clearDisplay();
+
+  // Display Numbers
+  display.setTextSize(1);
+  display.setCursor(0,0);
+  display.println(123456789);
+  display.display();
+  delay(2000);
+  display.clearDisplay();
+
+  // Specifying Base For Numbers
+  display.setCursor(0,0);
+  display.print("0x"); display.print(0xFF, HEX); 
+  display.print("(HEX) = ");
+  display.print(0xFF, DEC);
+  display.println("(DEC)"); 
+  display.display();
+  delay(2000);
+  display.clearDisplay();
+
+  // Display ASCII Characters
+  display.setCursor(0,0);
+  display.setTextSize(2);
+  display.write(3);
+  display.display();
+  delay(2000);
+  display.clearDisplay();
+
+  // Text Rotation
+  while(1)
+  {
+  display.clearDisplay();
+  display.setRotation(rotatetext);  // rotate 90 degrees counter clockwise, can also use values of 2 and 3 to go further.
+  display.setTextSize(1);
+  display.setTextColor(BLACK);
+  display.setCursor(0,0);
+  display.println("Text Rotation");
+  display.display();
+  delay(1000);
+  display.clearDisplay();
+  rotatetext++;
+  }
+}
+
+void loop() {}

SE/stuff/P5_Automation_can-dev-res-working-1930/___CONFIG/0x13/setup_Active_ControllerID_0x13.h

@@ -2,4 +2,5 @@ if(EEPROM_Active_ControllerID_read_A == 0x13) {
 HAS_ROTTARY_SW_A = true ; //#define HAS_ROTTARY_SW
 HAS_I2C_driver_Adafruit_PWMServoDriver_A = true ;
 pinMode(Port11, INPUT); //INPUT_PULLUP
+digitalWrite(Port11, LOW);
 }