a

SE/stuff/P5_Automation_can-dev-res-working-1930/___SUBMODULES___/ST7789_plus_voltage/ST7789_plus_voltage.ino

@@ -0,0 +1,83 @@
+
+#include "__main_struct.h" //lite #include "___main/__main_struct.h"
+
+#include "progmem.h"
+
+#include "__main_struct_limits.h"
+#include "_PortTypes_struct.h"
+#include "_Port_Exp_state_ttl_struct.h"
+#include "_Port_Broadcast_state_struct.h"
+#include "_PortStates_struct.h"
+#include "_Port_I2C_driver_struct.h"
+#include "config_Active_ControllerID.h"
+#include "config_Slave_Ports_LOCAL_config.h" //lite
+
+#include "automation_driven.submodule.struct.write_neuron_override.h"
+
+
+#include "_TASK_TYPES_struct.h"
+
+#include "_time_struct.h"
+
+#include "TASK_TYPE_T_Get_Ports_Status_INPUT_A___.h"
+
+
+#include "_Slave_Ports_Status_func_add_lite.h"
+
+
+
+#if Active_ControllerID == 0x14 
+    #include "0x14/config_Slave_Ports_LOCAL_0x14_init.h"
+#elif Active_ControllerID == 0x35
+     #include "0x35/config_Slave_Ports_neuron_LOCAL_0x35_init.h"
+#elif Active_ControllerID == 0x38
+     #include "0x38/config_Slave_Ports_LOCAL_0x38_init.h"
+ #elif Active_ControllerID == 0x43
+     #include "0x43/config_Slave_Ports_LOCAL_0x43_init.h"
+#else
+    #error not set  correct Active_ControllerID    
+#endif
+
+
+#if defined(HAS_Adafruit_ST7789)
+    #include <Adafruit_GFX.h>    // Core graphics library
+    #include <Adafruit_ST7789.h> // Hardware-specific library for ST7789
+    #include <SPI.h>  
+    // Initialize Adafruit ST7789 TFT library
+    //    Adafruit_ST7789 DISPLAY_DEV = Adafruit_ST7789(ST7789_CS, ST7789_DC, ST7789_RST);
+    Adafruit_ST7789 DISPLAY_DEV = Adafruit_ST7789(0, ST7789_DC, ST7789_RST);
+
+#endif
+
+
+void setup() {
+  // initialize digital pin ledPin as an output.
+    TASK_TYPE_T_Get_Ports_Status_INPUT_A___SETUP();
+    #if defined(HAS_Adafruit_ST7789)
+ 
+        DISPLAY_DEV.init(240, 240, SPI_MODE2);    // Init ST7789 display 240x240 pixel
+        //DISPLAY_DEV.setRotation(2);
+        DISPLAY_DEV.fillScreen(ST77XX_BLACK);
+        DISPLAY_DEV.setCursor(0, 0);
+          DISPLAY_DEV.setTextColor(WHITE);
+          DISPLAY_DEV.setTextWrap(true);
+          DISPLAY_DEV.print(F("P5 ST7789 Voltage"));
+
+    #endif
+    
+}
+
+
+
+// the loop function runs over and over again forever
+void loop() {
+  //digitalWrite(ledPin, HIGH);   // turn the LED on (HIGH is the voltage level)
+  delay(1000);                  // wait for a second
+    DISPLAY_DEV.setTextSize(4);
+    DISPLAY_DEV.drawRect(0, 20, DISPLAY_DEV.width(), 100, MAGENTA);
+    DISPLAY_DEV.setCursor(0, 40);
+      
+      DISPLAY_DEV.print(analogRead(A0));
+      DISPLAY_DEV.setCursor(0, 60);
+      DISPLAY_DEV.print(analogRead(A1));
+}